MULTIPLE CHOICE QUESTIONS WITH ANSWERS RELATED TO AUTOMOBILE ENGINEERING (PART-2)

1. The only service that a steering linkage normally requires is
a. Tie-rod adjustment
b. Lubrication
Ans : B

2. The Pitman arm in the steering gear is linked to the front wheels through the
a. Worm
b. Steering wheel
d. Steering shaft
Ans : C

3. Toe-in is adjusted by
a. Adding or removing shims
b. Changing the effective length of the tie rods
Ans : B

4. The backward tilt of the centre line of the ball joints from the vertical is called
a. Positive caster
b. Negative caster
d. Negative camber
Ans : A

5. The point at which the centre line of the wheel and the centre line of the ball joints cross is called the point of
a. Intersection
b. Departure
Ans : A

6. The inward tilt of the centre line of the ball joints is called
a. Caster
b. Camber
d. Toe-out
Ans : C

7. Wheel camber helps to
a. Enable the driver to feel straight ahead position
b. Reduce the bending stress on the stub axle and king pin
d. Make it safer for the vehicle to take corners
Ans : C

8. When the top of the king pin is tilted towards the driver, the phenomenon is known as
a. Negative caster
b. Positive caster
d. Skidding
Ans : B

9.The drawing in of the front wheels in front so that the distance between the front ends is slightly less than that between the back ends is known as
a. Toe-out
b. Roll-out
d. Roll-in
Ans : C

10.When the front wheels are not parallel to each other and moved further away at the top, it is termed as
a. Positive camber
b. Negative camber
d. Roll out
Ans : A

11.When the front wheels are closer at the top it is termed as
a. Toe-in
b. Toe-out
d. Positive camber
Ans : C

12.Positive caster tends to make the front wheels
a. Toe in
b. Toe out
Ans : A

13. The inward tilt of king pin is called
a. Caster
b. Camber
d. Toe-out
Ans : C

14. Tilting of the front wheels away from the vertical is called
a. Camber
b. Caster
d. Toe-out
Ans : A

15. Caster action on the front wheels of a vehicle will
a. Make it easier to take corners
b. Reduce the load on the king pins
d. Enable the driver to feel straight wheel position
Ans : D

Link for part 1-https://mechanicalsphere.blogspot.in/2016/08/multiple-choice-questions-with-answers.html